Los 23 Mejores guitarra grover.

Opinión de un comprador: Awesome machine heads that stay in tune and also look nice on my Martin D16-RGT.
Much better price than on other página web sites.

VER MÁS OPINIONES

Opinión de un comprador: These are so easy to use as the ratio is high and you can make small adjustments easily.
If you use a Peterson tuner, accurate to One thousanth of a fret, as I do then small adjustment are needed.
These tuners give that.

VER MÁS OPINIONES

Opinión de un comprador: Desde Estados Unidos solo tardó once días con aviso detallada. .. Un 10 para amazon y para la marca. Las clavijas impresionantes, bastante buenos acabados.

VER MÁS OPINIONES

Opinión de un comprador: I regalo't have to write very much about these as all the others have given 5 Stars as well, they are Great I wasn't sure If they would fit on my
Martin D45 but they fit like a glove, so as you see by my opiniones and all the others they are the ones to get, grover quinientos dos G Gold.

VER MÁS OPINIONES

Opinión de un comprador: Perfecto terminado, se adaptan perfectamente dentro de una strato y sobre todo, están teniendo mucha unión la única inconveniente es que el tornillo de agarre es más importante que el cual viene de serie de con la guitarra, por lo otras personas van perfectos.

VER MÁS OPINIONES

Opinión de un comprador: Un clavijero de calidad, las puse a una guitarra modelo Os Paul que ya no lograba sostener la afinación y me encuentro contentísima con el rendimiento de este clavijero. Bastante fácil de actualizar las cuerdas y un funcionamiento muy necesario.

VER MÁS OPINIONES

Opinión de un comprador: A good set of tunners that maintain tunning. Easy to install. The only draw back is the package containing the bushings and washers came with only 5 washers.

VER MÁS OPINIONES

Opinión de un comprador: Poco que comunicar de las clavijas grover, por su propia calidad algo caras pero valen la pena, muy Convenientes.

VER MÁS OPINIONES

Opinión de un comprador: Bought these for by guild acoustic when i broke a head. These were so good i replaced the whole kit. Surprising for the price point.

VER MÁS OPINIONES

Opinión de un comprador: I have an angled nut riser which if you push against the side, it moves and you go out of tune.
This is much better. It sits snugly over your existing nut and once you are tuned up it does not move at all. Perfect tuning stability.
I put a pack of Nashville strings in my guitar so I can tune the open C6 just like s contínuo lap steel:
CEGACE
( use the Nashville strings thickest to this best from the bass to treble side rather than the order for Nashville tuning )

VER MÁS OPINIONES

Opinión de un comprador: Tuners work

VER MÁS OPINIONES

Opinión de un comprador: Awesome tuners, work so well and easily I still can't believe they keep my SG in tune, but they do!

VER MÁS OPINIONES

Opinión de un comprador: I really like the concept of the quick release strap. One of the locks shaft had no threads where they were on the other and the nut had nothing to attach to, the other was fine. I could not tell if the package had previously been opened or it came from the factory that way. I did not contact the seller as I had no desire to ship it back and then wait for a replacement. I simply epoxied the nut in place. Once that was done the quick release is great for swapping between guitars or when I put them into a expositor.

VER MÁS OPINIONES

Opinión de un comprador: Used these to replace the mercancía tuners on a Squier Mini Strat which had absolutely attrocious tuners on. These Grovers just ooze quality and have now made the mini strat into a decent useable guitar. The grovers fit the existing bushings fine and covered all the screw holes apart from 1/2 a single screwhole which was barely noticeable. Guitar now rarely needs tuning. Definately recommend these, especially if you own a mini strat.

VER MÁS OPINIONES

Opinión de un comprador: First of all, they regalo't feel smooth to use like my other pack of Grovers. Almost as if they were not dieciocho:1 gearing but something more coarse.
Secondly, they keep snapping strings and are unusable with a pack of 9s. They snapped my ranking E string (at the tuning peg) as I was tuning up for the first time. Then again. After a trip to local comercial guitar shop I tried, carefully, a diez gauge top E instead of 9. This worked ok. Just today I changed all the strings, trying a pack of 9s again. .. PING! E string snapped again.
I just checked and Amazon say the Return window closed on Aug 2nd, over three weeks ago. Great. I'm stuck with this junk. I'm going to put my old Squire standard tuners back on. They feel at least as good and never snap the strings.

VER MÁS OPINIONES

Opinión de un comprador: As someone who is not happy with the recent changes to Gibson - truss rod covers with "Standard", "Studio" or "Traditional" written on them, bulky Rotomatic tuners (which make them look like an Epiphones), acero knobs that look like the wheels from a skateboard and, worst of all, the Min-ETune - I wanted to give my dos mil doce Hummingbird a more traditional and vintage look. I knew I wanted to replace the clumpy, kidney bean-looking grover Rotomatics to these vintage machine heads. Before buying them, I had doubts as to whether they would fit properly and whether there would be any visible scarring at the back of the headstock. It was hard to come across any opiniones with feedback on this matter, so that is what I'll address here (if you also have those doubts).
If you are looking at replacing your Rotomatics with these, they fit perfectly. No additional bushings are required to fill in the space and you do not need to hack away at the headstock to create a bigger hole. I did some research beforehand and if you were to buy Gibson tuners, the cylinder (that goes through the hole in the headstock) doesn't have the same thick base that Grovers have, so you would need to buy bushings separately so that they fit nicely and regalo't move around. These bushings can be found at web. Stewmac.com. I sospeché the same would apply if you were to get Kluson, Gotoh or Schaller tuners, so I would suggest replacing your Grovers with Grovers. The single screw holes left by the Rotomatics also line up where one of the screws on these vintage tuners is, so there is no need to worry about whether there will visible scar at the back of your guitar.
Unlike the Rotomatics, there are two screw holes on these machine heads. If you're like me and are afraid of drilling a hole into your guitar in case you permanently ruin it, there is no concreto worry about that. I attempted to just put the second screws in with a screwdriver and it worked out fine. As long as you use a proper screwdriver and take care while you do it, it should turn out OK. Having the machine head locked in and one screw already in place, the tuners are held in tight, so there is no concreto risk of them ending up crooked when you put the second screw in.
They look amazing, they cover up any marks left by the Rotomatics and they're great at keeping the guitar in tune. Grover is a highly-respected brand which generas great tuners for guitars, so you can put your trust in them. So, if you want your Gibson to look like a proper Gibson and not like an Epiphone, then I'd definitely recommend getting these. They may be a little bit pricey, but if your going to make a permanent adjustment to your guitar, you may as well go for the best.

VER MÁS OPINIONES

Opinión de un comprador: Received and found the gears were pretty slack on all tuners but one tuner was crunching/meshing and slipping even before any use. Very poor quality/quality control, certainly wouldn't trust Wilkinson again. They are stamped Wilkinson on the back but also Jin Ho - Korea, although they are actually manufactured in Asia.

VER MÁS OPINIONES

Opinión de un comprador: El recibir un producto distinto al reseñado en la página implica una enorme preocupación por los trámites y la espera de los plazos de reembolso como volver a gestionar una exclusiva compra. El producto mandado es parecido y satisface su propia misión pero no es el adquirido.

VER MÁS OPINIONES

Opinión de un comprador: Excelentes, cambio total de guitarra muerta y sin provecho, ha vuelto a empezar. Encajan perfecto, con aislamiento. Una arandela y tornillo auxiliares a los necesarios. Aconsejables. Son marca Jin-ho.

VER MÁS OPINIONES

Opinión de un comprador: Los he configurado adecuadamente pero vienen sin los 6 casquillos de metal que además están en las imagenes, he podido usar los viejos.

VER MÁS OPINIONES

Opinión de un comprador: I've tried a couple other brands on guitars I've built. These went on a cincuenta's style hardtail Strat and not only do they look like they belong, they are smooth and hold tune very well. What more could you ask for?

VER MÁS OPINIONES

Opinión de un comprador: Nice machine heads. Perfect for my guitar

VER MÁS OPINIONES

Opinión de un comprador: I had these about a week now,

VER MÁS OPINIONES